Automatic Drinker Bucket KIT,Cups,Hose Adapter, Float Valve,chicken,quail,turkey


Available on eBay


Bucket Float Valve Kit and Automatic Drinker Cups


·       All
plastic construction

·       Adjustable
water level

·       Does not
require constant maintenance or the need to manually keep filling with a hose

·       With our
right-angle garden hose adapter, the hose strain is minimized thus extending
the life of your garden hose

·       Easy
installation, flexible adjustment

·       Float
head is 2 ½” in diameter and the whole float is 6 ½” in length.

·       Recommended
that you use Teflon tape for added seal protection

·       Has a
removable debris screen to keep you system free of gunk and functional

·       The
reason we choose to go with a PVC construction is because of the wider variety
of vitamins and medications you can use in your system with it reacting with
the valve or any part of the valve itself I.E screws, nuts, or Pins.

(made in North America)

1- adjustable float valve
Flanged nut and rubber ring for a greater seal
1- right angle adapter
1- ½”x ¾” PVC swivel (garden hose adapter) 
1- internal debris screen 
4- heavy duty automatic drinker Cups 
4- plastic nuts, washer and O rings
·        <<< Bucket Not Included >>>

Installation instructions:
1.    Acquire
a bucket or container of your choice.

2.    Drill a ¾”
hole 4-6 inches from the top of the bucket

3.    Unthread
your flanged nut off your float valve

4.    Pass the
float valves threaded end with rubber seal through the previously drilled hole
so the rubber seal is inside the container

5.    Thread
flange nut on a tighten till snug

6.    Apply
Teflon tape to thread and thread on the 90-degree elbow

7.    Once
elbow has been tightened till snug apply Teflon tape to threads

8.    Thread
your garden hose adapter till snug

9.    Choose a
garden hose of your choice and thread it to the adapter.

 10. drinker cups .
  Simply drill a 3/8” hole into your bucket, and Thread in 

Your drinkers and install hardware on rear. you can use Teflon tape or silicon or added seal. Very simple.


Installation tips:
You can use a 3/4  step drill bit or a spade wood
drill bit but with both be careful on how much force is applied.

A good measurement for installing your float
system is to measure between 4-6 inches depending on how much water you want at
one time and the weight of the bucket itself if you going to have it suspended
in the air.

In the colder winter months, you can add a small
water heater that you can get from most pet stores to keep your animals’ water
from freezing.

A quick way to sterilize your system and keep you
birds in good health is to use a capful of apple cider vinegar. (1 oz to 1 gal
of water) : )

Additional information



Modified Item


Custom Bundle


Non-Domestic Product




Poultry Species



automatic drinker kit

Incubator Rotation





Does not apply